A stepping stone walkway creates an unobtrusive, economical path through a
garden or lawn. It uses fewer paving stones than a full walkway, while still
giving a place for each footstep to land out of the dirt or wet grass. The
paving stones themselves may be rustic natural stones or square cement pavers.
In an artistically arranged garden, you can control the pace of the person using
the path by setting the stones closer or farther, encouraging contemplation or
efficient movement.
Instructions as follows:
Firstly, mark the path by laying a string on the grass or dirt. The
informal nature of a stepping stone path means you may prefer it to curve or
meander, so there's no need to lay it out precisely with stretched string unless
you want a perfectly straight path. Walk the path a few times at different
paces, noticing what seems most comfortable and where you naturally slow down to
look at something or to negotiate a hill or curve.
Secondly, walk the path again, recreating the best pace, but pause each
time you put your foot down and mark the location with a short cross-line of
spray paint.
Thirdly, purchase or gather the stepping stones you'll be using and lay
them alongside the path. Choose flat natural stones, plain concrete pavers or
decorative man-made stepping stones.
Fourthly, lay the first stone directly over a spray-paint mark and cut into
the sod or dirt around the edges with a trowel to mark the size. Remove the
stone and dig out the sod and dirt 1 inch deeper than the thickness of the
stone, using the trowel or a shovel.
Fifthly, shovel gravel into the hole to cover the bottom 1 inch deep. Tread
on the gravel to press it down. Lay the stone in place on top of the gravel,
stepping on the stone again to settle it in place. Add more gravel around the
edges if the hole is slightly wider than the stone.
Sixthly, repeat to install the rest of the stones.
没有评论:
发表评论